Transferring a Call
You can transfer a call from one station to another. | Hold/Transfer | ||
|
|
| |
All |
|
| |
) During a call, press [int’com/hold] on the handset or [int'com/hold] on the |
|
| |
Handset |
| #2 | |
base. The line key. The line key (the LINE1 or LINE2 soft key on the handset, or | LINE1 | OK | LINE2 |
[LINE2] or [LINE2] on the base) will flash and the caller will be put on hold.
2)Use [
] or [
] to select the station you want to transfer the call to, then press the OK soft key. The call will automatically be placed on hold, and a paging tone sounds. To cancel the transfer, press [ /flash] or [
] the handset or [
] on the base.
3)When another station accepts the transferred call, your call will be disconnected. If you want to rejoin the call, press the line key again.
Answering a Transferred Call
When a station receives a call transfer, it sounds a paging tone and shows the ID of the station that is paging. To ac- cept the call transfer:
) Press [ /flash], [int’com/hold], or the ANSWER soft key from the handset (or pick up the base corded hand- set from the base, or press [int'com/hold], [
], or the ANSWER soft key on the base).
2)After answering the page, if you want to accept the call and speak to the outside caller, press the correspond- ing line key. The line key (the LINE1 or LINE2 soft key on the handset, or [LINE2] or [LINE2] on the base).
If you have multiple handsets, only the first handset to answer the transfer page will be connected to the call. If the transfer page is not picked up within one minute, the operation will be canceled.
46
