Uniden TRU9496 70, Remote.Commands Command Function Command Function

70
Remote.Commands
Command Function Command Function
0.then.1Repeat.a.Message* 0.then.6Answering.System.On
0.then.2Playback.Messages 0.then.7Memo.Record/Stop**
0.then.3Skipping.a.Message 0.then.8Greeting.Record/Stop**
0.then.4Deleting.a.Message 0.then.9Answer.System.Off
0.then.5Stop.Operation 1.then.0Help.Guidance
*.To.Repeat.a.Message,.press.[0].then.[1].within.four.seconds.to.repeat.the.previous.message,.or.press.[0].then.[1].
after.four.seconds.to.repeat.the.current.message.
** For the Memo Record and Greeting Record/Stop, the rst time you enter the corresponding command, it starts the
Recording..If.you.want.to.stop.the.recording,.press.[0].then.[7],.[8],.or.[5].
When you nish, you will hear intermittent beeps indicating that the answering machine is in the command
waiting.mode..You.can.enter.another.command.from.the.chart,.or.you.can.hang.up.to.exit.the.answering.ma-
chine..
When.you.hang.up,.the.answering.machine.automatically.returns.to.its.normal.standby.setting.
Note:
The.system.will.only.playback.messages.for.four.minutes.and.then.it.returns.to.the.command-waiting.mode.
To.continue.playing.your.messages,.press.[0].then.[2].again.within.15.seconds.
If.you.enter.an.incorrect.security.code.three.times,.you.will.hear.a.beep.and.the.answering.machine.will.return.
to.standby.
5)
6)
•
•
•