2)Move the cursor to CALL PRIVACY, and then press the OK soft key. PRIVACY MODE ON will appear in the

display for 2 seconds, but the icon will appear and remain in the display until the feature is turned off. Other stations will not be able to make a call and their display will list UNAVAILABLE.

To turn Privacy off, repeat the procedures listed above. PRIVACY MODE OFF appears.

Using the DirectLink Feature

A pair of handsets (or two pairs of handsets at one time) can function as two-way radios. This fea- ture is called DirectLink and will not interfere with the base’s ability to make or receive telephone calls while in use. To activate, you must set both handsets to the DirectLink feature. While using this feature, these two handsets will not be able to make or receive normal phone calls until this operation is canceled; however, other handsets will function normally.

Note: If the party is out of range, NO SIGNAL appears in the display and the operation will be canceled.

) Press the MENU soft key. Select DIRECTLINK MODE menu.

2)Press the OK soft key. The display shows TO ENTER DIRECTLINK MODE PRESS . [ENTER].

3)Press the ENTER soft key. You will hear a confirmation tone, and DIRECTLINK MODE COMPLETE appears in the display.

To enter DirectLink mode press [ENTER]

BACK DELETE ENTER

48

Page 49
Image 49
Uniden TRU9496 manual Using the DirectLink Feature