UBC93XLT Paper OM.fm Page 43 Monday, May 14, 2007 9:01 AM
1.Press Hold to stop the search.
2.Press Func + 
or Func + 
to select the frequency. L/O appears.
3.Press Func + L/O. L/O disappears.
To clear all the skip frequencies at once while searching or search hold, press Func then press and hold L/O until the scanner beeps.
Notes:
•If you selected all frequencies to be skipped within the search range, the scanner beeps 3 times and does not search.
•If you select more than 50 frequencies to skip, each new frequency replaces a frequency previously stored, beginning with the first stored frequency.
•Press Func + 
or Func + 
to select a skipped frequency while Hold appears. L/O appears when you select a skipped frequency.
Delay
Sometimes a user might pause before replying to a transmission. To avoid missing a reply on a specific channel, you can program a
2 seconds after the transmission stops before resuming scanning or searching. The scanner automatically sets a delay when you store frequencies into channels or when you search frequencies. When the delay feature is on, DLY appears. If it is off, follow one of these steps to program a delay depending on how the scanner is operating,.
Special Features
43
