Function key [F3]: Operate menu
The Operate menu controls transmitting and receiving.
Operate
1:Call Station
2:Macro Operation
3:File to Send
4:Cancel Sending
5:Scan (Start/Stop)
6:Manual Reception
7:Timer Operation
8:High Tension ON
9:Manual Calling
0:Set Frequency
Figure 2-9 Operate menu
1: Call Station | Selects a station from the station list. |
2:Macro Operation Enables fully automatic operation.
3: | File to Send | Selects a file (to transmit). |
4: | Cancel Sending | Stops sending a file. |
5:Scan Start/Stop Starts/stops frequency scanning.
6:Manual Reception Selects communication mode for re- ception; AUTO/ARQ/FEC.
7: Timer Operation | Timer programming. |
8:High Tension ON/OFF Turns on/off transmitter high volt- age on a FURUNO radio.
9:Manual Calling Sets Tx mode and subscriber's ID number in manual calling.
0:Set Frequency Sets Tx and Rx frequencies in manual calling.
