MIF Freeze | Turn on to send "freeze" command to |
| radio equipment connected. (Requires |
| FURUNO radio equipment.) |
MIF AGC | Turn on to automatically control gain in |
| telex mode. (Requires radio equipment |
| which supports AGC command in MIF |
| format.) |
MIF Emission | Turn on to automatically change mode |
| at radio equipment to telex. (Requires |
| radio equipment which supports Emis- |
| sion command in MIF format.) |
TX/RX MSG Save | Turn on to automatically save incoming |
| and outgoing messages to floppy disk. |
Edit Before Sending | "No" transmits keying operation one by |
| one. "Yes" transmits message only when |
| the [Enter] key is pressed after confirm- |
| ing text typed. |
Time System | Select Time system. SMT is local time |
| and JST is Japan standard time. |
Time & Date | Enter Date and time manually. If a navi- |
| gation device is connected, the time is |
| automatically set when the power is |
| turned on or whenever the time system |
| is switched. Manual entry takes prior- |
| ity over automatic entry. If there is no |
| the navigation data input, it takes more |
| than extra 10 seconds for automatic ini- |
| tial settings. |
Display mode | Select display mode between normal and |
| reverse. |
Function key [F7]: WRU (Who Are You?)
In the ARQ mode, requests other station's answerback code.
Function key [F8]: HR (Here Is)
In the ARQ mode, sends your ship's answerback code.
