8.If you selected "Channel" enter ITU channel number (see ap- pendix) or User channel number (see page 3-9).

If you selected the "ScanTable", press the [ ] key to show a scan group list registered (see page 3-7). Select a scan group name by using the [ ] or [ ] key followed by pressing the [Enter] key.

Scanning Group List

MARITEX-A

MARITEX-B

MARITEX-C

FURUNO

CHOUSHI

MARITEX-F

9.Press the [Enter] key. The prompt OK/CANCEL asks for veri- fication of data.

CREATE

CHANGE

O K

CANCEL

Figure 3-6 OK/CANCEL prompt

10.If the data are correct, press the [Enter] key. (To cancel entry, place cursor on CANCEL by pressing the [ ] key, and then hit the [Enter] key. Data entered are erased.)

To register other stations, select Create again and then press the [Enter] key. Repeat steps 3 – 10.

To confirm the data registered, press the [ ] key to get into the Station Set Up window.

Note: If you enter a station which exists the indication "Station by that name already exists. Press any key to escape." appears. Press any key to return to the Station List. Check the list.

Editing/Deleting Stations

1.Press function key [F5] and then the [1] key.

2.Select station from the Station List.

3.Select Change and press the [Enter] key.

3-4

Page 28
Image 28
Furuno DP-6 manual Editing/Deleting Stations, OK/CANCEL prompt