Furuno DP-6 manual ARQ FEC Dirc

Registering Stations

The next step is to enter station name. The procedure is the same as the procedure shown on page 3-3. The station list provides ab- breviated dialing with storage for up to 50 stations.

1.Press function key [F5] and the [1] key. The Station Entry screen appears.

Station Entry

Station List

Station Set Up

Create

Change

Station	:
ID Code	:
Mode	: ARQ FEC DIRC
CH/Table	: Channel ScanTable

Num/Table:

Figure 7-4 Station entry screen

2.If Create is not underlined, press [ ], [ ] and the [Enter] key to underline it.

3.The cursor is on the Station line. Enter station name, using up to 20 characters.

4.Press the [ ] key to go to the ID Code line. Enter station ID code; the coast station selective call number common to all stations is 2950.

5.Press the [ ] key to go to the Mode line. The MARITEX sys- tem uses the ARQ mode.

6.Select ScanTable on the CH/Table line.

7.Press [ ] to go to Num/Table.

7-6