Uniden UH-100 Activating the Tone Squelch Receiver Quieting, Receiving Calls when in Quiet Mode

Activating the Tone Squelch (Receiver Quieting)

1.Select the channel you want to put into quiet mode using the channel selector switches.

5	"-/
"EM	ILl II ml,~--:;;
'176.6 sa"""
~	~
((~)~~~~	""'r' ~) "'tI """'IC
TSQ

2.Press the SCRAMBLElTSQ button for about 1.5 seconds. One beep is heard and

the TSQ indicator appears on the display. This channel is now programmed to operate in Quiet Mode.

"EM TSO	I ,-, f8
5		~
'I 76.6S01AHz	I LI ~
~	~
~~~~	.

When a quiet mode channel is selected the TSQ indicator appears on the display. The

microphone PTT is disabled on that channel until a signal with your SelcalllD is received. All other channels can be used as normal.

3.To deactivate any channel in quiet mode first select the relevant channel.

Press the SCRAMBLElTSQ button for about 1.5 seconds. Two beeps are heard and the TSQ indicator disappears from the display.

Receiving Calls when in Quiet Mode

The UH-100 will respond in the same way in quiet mode as when it is called while in normal mode.

When the call is left unanswered, however, the radio automatically resumes the quiet condition. (The auto - quiet mode function can be switched ON or OFF, please refer to the Selcall Advance Programming section on page 32)

30