Uniden UH-100 owner manual 11 ~

8.SCANCONTROL(SCN)- Press to activate Normal OS/GS scanning or press and hold to enable Seek Mode OS/GS Scanning.

9.MEMORY CONTROL (MEM) - Places channel numbers into the memory scan list (OS or GS).

10.AUDIO SCRAMBLER I TONE SQUELCH CONTROL - Controls access to audio scrambling feature and Tone Squelched operation (Quiet Mode).

Indicators

	m CA:JMEM			~	~
			TS~	'~	I '~	I
6	DUP f		GS
	SRF...1	I SC			11~	1
	DDD.DDD,MHz		I11~
	Cl Cl Cl Cl Cl Cl		PRI

11.Channel Indicator - ,Indicates the channel number currently selected. On TX

SELCALL usage the Channel Indicator becomes a Memory location indicator.

12.Scan Indicator (SCN) - SCN icon appears when Normal Scan mode is activated. When Seek Mode Scanning is selected the SCN icon blinks.

13.Priority Indicator (PRI) - Indicates that Priority channel is active when continuously lit or Flashes when it is regularly being checked for activity while GS scanning.

14.Frequency I SELCALL ID Indicator - Shows the frequency of the current selected

channel. The Frequency Indicator changes to SELCALL ID display when using the SELCALL feature.

15.RECEIVE SIGNAL I RF LEVEL Indicator (S I RF) - Indicates the relative signal strength level when receiving (S) or the relative transmit power (RF) when transmitting.

16.DUPLEX Indicator (DUP) - The DUP icon appears when duplex operation is selected.

17.TRANSMIT Indicator (TX) - TX appears when the PTT button on the microphone is pressed and the radio is transmitting. The RF icon also appears at this time.

18.CALL Indicator (CAL) - The CAL icon appears when the UH-100 radio is called using SELCALL. It also appears when SELCALL codes are being transmitted.

19.SCRAMBLER Indicator (f) - The f icon appears when the Voice scrambler is activated.

20.MEMORY Indicator (MEM) - MEM appears when the displayed channel is programmed either in GS or OS Memory.

21.TONE SQUELCH Indicator (TSQ) - The TSQ icon will appear when the selected

channel is set to operate in Quiet Mode, or flashes when the radio is called using

SELCALL.

22.GROUP SCAN Indicator (GS) - The GS icon appears when Group Scan Mode is activated. Open Scan is indicated by the absence of the GS icon.

4