Uniden UH-100 owner manual 1711OOMHz

2. Group Scan (GS) Mode

Allows you to monitor a Priority Channel while scanning.

MEMGS ,'<E71-,

To use GS Mode Scanning, press the OS I GS key. GS icon appears on the display. OS Mode is indicated by the absence of the GS icon.

GS Scanning checks the Priority channel activity regularly.

If the Priority channel becomes active the radio will stay on that channel for as long as the signal is present. If

the received signal ceases, Priority scanning continues after 3 seconds.

If scanning stops on a channel which is not a Priority Channel, UH-100 will continue monitoring the Priority Channel for activity while listening to the active one.

egoCH40 becomes active.

To deactivate SCAN, press the SCN key or the PTT Switch.

SCN0'"-=,,=-,

~

	MEM	, -,
	GS
	SCN
	PRI	,	,
	MEM	, -,
	as
S	I SCN
I{ 75.825MHzPRI		,	,

SSCN

MEM1as ,"' , ,-,

1{711{OOMHz" - ,

~

MEM as , -,

SSCN , , I{ 75.825MHzPRI

Note: If SCAN is deactivated while it is tuned at an active channel, the UH-100will stay on that active channel. If none of the channels are active, the UH-100 willreinstate the Prioritychannel.

If GS Scanning is initiated when there are no channels programmed in GS

memory, an error tone will be heard and scanning will not start.

14