￿Even if all 100 memory locations are full, The message will be stored in the phonebook. However, the oldest Caller ID message will be erased from the Caller ID list.

￿If all 100 phonebook locations in a handset are already stored, You will hear a beep and the operation will be Canceled. Phonebook locations will not be copied to that handset.

￿If the selected party is out of range or data transfer is canceled, Unavailable Appears in the display. Phonebook locations will not be transferred.

￿CIDCW (Caller ID on Call Waiting) is available in Australia only.

To delete the entry:

From the base-press the DELETE soft key. Use /volume up/down to select Yes, and press select/ (or the OK soft key).

5)If you are deleting the entry, you will hear a confirmation tone, and Deleted! appears in the display. If you are editing the entry, follow the steps 4 to 9 under “Storing and Editing Phone Numbers, Names, Distinctive Rings and Speed Dial” on page 41 to complete the editing operation.

Handset Instructions

For handset Phonebook Editing please see"Storing and Editing Phone Numbers, Names, Distinctive Rings and Speed Dial" steps 4 to 9 on page 41. For handset Phonebook Erasing please see step 8 of same section.

Copying Phonebook Locations

Copy Phonebook allows you to transfer stored phonebook locations from handset to other handset or from the base to handset (or from the handset to base) without having to manually re-enter names and numbers. You can transfer one memory (phonebook location) at a time, or all memory locations at once.

Base Instructions

1)

When the phone is in standby mode, press

 

.

 

 

2)

Press /volume up/down to select Copy, and then press the OK soft key.

3)

Press

/volume up/down to select the handset or the base to which you want

 

to transfer the phonebook locations and then press the OK soft key.

 

 

[47]

 

 

Page 48
Image 48
Uniden WDECT 2345+1 owner manual Copying Phonebook Locations, To delete the entry, Base Instructions