2)Press 
/volume up/down to select a Ring Time.
3)Press select/
(or the OK soft key on the base). You will hear a confirmation tone.
Setting the Record Time
Record Time sets the duration for recording the incoming messages. You have three record time options: "one minute" "four minutes" or "Announce Only". "Announce only" answers the call but prevents the caller from leaving a message.
1) Press menu/del (or the MENU soft key on the base). Select the Answ. Setup menu, and then the Record Time submenu.
2) Press 
/volume up/down to select Record Time (1 Minute, 4 Minutes, or Announce Only).
3) Press select/
(or the OK soft key on the base). You will hear a confirmation tone.
Setting the Message Alert On or Off
Message Alert sounds an alert tone when you have an unheard message. If you set Message Alert on, whenever a new message is received, the soft alert tone will sound every 15 seconds. When all messages have been played back, the alert tone automatically deactivates.
[58]
