Setting the Insert Zero
This feature adds '0' or '00' to the number, when you receive Caller ID messages. The default setting for New Zealand is On. The default setting for Australia is Off.
1) Press menu/del (or the MENU soft key
on the base). Select the Global Setup menu, and then the Insert 0 submenu.
2) Press
/volume up/down to select On or Off (the initial setting is On).
3) Press select/ (or the OK soft key on the base). You will hear a confirmation tone.
Setting Name Tag
The Name Tag feature works with the Caller Display number from Caller ID. A subscription to this service is required from your network provider. There is usually a fee for this service. When the phone rings the caller display number, when received will be compared to numbers stored in the phonebook. If there is a match any name stored with the phonebook number will be displayed.
1) Press menu/del (or the MENU soft key
on the base). Select the Global Setup menu, and then the Name Tag submenu.
2) Press 
/volume up/down to select On or Off (the initial setting is On).
3) Press select/ (or the OK soft key on the base). You will hear a confirmation tone.
[27]
