E. Mount the Base Unit on a Wall
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1)Detach the wall mount adaptor from the bottom of the base.
2)Snap the wall mount adaptor into the notches on the base bottom as shown.
3)Plug the AC adaptor into the DC IN 9V jack. Wrap the AC adaptor cord inside the molded wiring channel as shown.
4)Plug the AC adaptor into a standard 240V AC wall outlet.
5)Plug the telephone line cord into the TEL LINE jack.
6)Plug the telephone line cord into the telephone outlets.
7)Raise the antenna to a vertical position.
8)Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated.
9)Press and push up on the handset holder to lift and remove it. Turn it over and rotate it 180°, then slide it down into its slot and snap it back into place so it holds the handset.
10)Connect the handset cord to the left side of the phone and corded handset.
[14]
