Symptom |
| Suggestion |
|
|
|
Severe noise interference. | • | Keep the handset away from microwave ovens, computers, remote control toys, wireless |
|
| microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical |
| • | appliances. |
| Move to another location or turn off the source of interference. | |
|
|
|
The Caller ID does not display. | • | The handset was picked up before the second ring. |
| • | The call was placed through a switchboard. |
| • | Call your local telephone company to verify your Caller ID service is current. There may be a |
|
| problem with your Caller ID service. |
|
|
|
You cannot register the handset | • | Charge the battery pack for 15- 20 hours. |
at the base. | • | De- register the handset (see “De- register the Handset” on page 28) and register the handset |
| • | (see “Register the Handset” on page 17). |
| De- register the handset (see “De- register the Handset” on page 28 and register the handset | |
| • | (see “Register the Handset” on page 17). |
| Make sure that you have registered all handsets. | |
The handset doesn't | • | Make sure there are not two handsets already using the conference feature. |
communicate with other | • | Make sure that another handset or base is not in privacy mode. |
handsets. |
|
|
An extra handset can't join | • Make sure that another handset is not in privacy mode. | |
the conversation. |
|
|
The base can't join the | • Make sure to place the handset (s) within the range of the base. | |
conversation |
|
|
Room Monitor feature does not | • | Make sure the base unit is plugged in. |
work. | • | Make sure that the answering system is turned on. |
| • Make sure that the message record time is not set to Announce only (see page 58). | |
|
|
|
The answering system does not | • | The incoming messages may be too long. Remind callers to leave a brief message. |
work. | • | The memory may be full. Delete some or all of the saved messages. After a power failure, |
|
| the outgoing message is deleted. |
Messages are incomplete. | • | Record your greeting again. The default message should remain. |
|
|
|
|
| [80] |
