Uniden XC 320 manual Buttons INTCButton

Numeric Keys

ONE-TOUCH DIAL

Buttons

INT'CButton

FLASH/A. TONE

Button

CHANNEL Button

RING ON/BATT SAVE Switch

MEM Button

ADUP Button

VOLUME/A. VOL. Button

Use for dialing numbers and storing numbers in memory.

Special memory locations for storing numbers. Press the appropriate button to dial a number.

Use to page the Base Unit and establish communication between the Handset and the Base Unit. When you press this button, 3 beep tones sounds repetitively at the Base Unit and Handset until the page is answered. (Note: The Page/Intercom feature does not work if the BASEUNITRINGERswitch is in the "OFF"position or if the phone is in use.)

This button has a dual function: (a) When making a call, press to send a timed "hook-flash" on the telephone line for accessing services such as call waiting, etc. (b)

When the telephone is not in use, press to select one of two ring tone types.

Press to select one of the available channels for clearest operation. (Note: Operates only when the phone is in use.)

(On the side of the Handset) Set the switch to "RING ON"to enable ringing when a call is received. Set the

switch to "BATTSAVE"to save battery energy when the Handset is not in use. Note: When "BATT SAVE"is

selected, ringing at the Handset is disabled. (The Base Unit, however, will still ring if the BASEUNITRINGER switch is set to "LO" or "Hr.)

Use when storing numbers to memory.

This button has a dual function: It redials the last

number dialed, or inserts a pause in memory dialing sequences.

This button has a dual function: (a) When making a call, press once to adjusts the volume of the earpiece speaker (loud or soft). (b) When the telephone is not in use, press to select the Handset ring volume (high or Iow).

10