Uniden manual XC 320 Featu res, Automatic Digital Code Security

XC 320 Featu res

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

UltraClear Plus noise reduction provides the quality sound of a corded telephone.

Eight 30/39 MHz Channels (Australia): Three 30/39 MHz Channels (New Zealand)

20-Number Memory

Maximum Operating Range

One-Touch Memory Dialing

2-Way Paging/Intercom

Redial/Pause and Flash

AutoStandby

AutoTalk

Tone/Pulse Dialing (available on Australian Models only) Automatic Digital Code Security

Handset Volume Control/Ringer Volume Control

Battery Saving Feature

2-Way Handset Mounting

Reversible Handset Retainer

Automatic Digital Code Security

Many cordless telephones operate similarly and on the same frequency. Without digital code security, another Handset could make calls using your Base Unit and telephone line. Therefore, to avoid any unauthorized calls through your Base Unit, a Digital Code feature was added to your XC 320. This Digital Code is shared only between the Handset and Base Unit. The Code is set automaticallywhen you first use the phone.

If the Base Unit loses power while the Handset is off the Base, the Digital

Code may be erased. When this happens, the Handset will not function. To establish communication between the Handset and Base Unit:

1.Restore power to the Base Unit.

2.Place the Handset on the Base Unit. The CHARGELED will blink to indicate that the Digital Security Code is set.

6