Unisys NX5820 Configuration Guidelines, VX1305 Servers, VX1305 Server CS Bus Cable Connection

VX1305 Servers

Configuration Guidelines VX1305

Table 6–7 lists guidelines for configuring VX1305 servers. Figure 6–2 shows the connection from a VX1305 server to the CIOM card in the CEC module or to the PCI Thru card in channel racks.

Table 6–7. Configuration Guidelines, VX1305 Servers

Area	Rule/Recommendation
Windows NT Connection	See Table 6–5 for details.
Packages
Processor Addition	One additional processor may be added to a maximum of two per server. See
	Table 6–3 for details.
Disk Addition	Additional disk may be added to a maximum of three per server.	See Table 6–1
	for recommendations.
Memory Additions	Three increments of 256 MB can be added to a memory board.	See Table 6–4.
PCD Generation	Refer to Appendix B of the A Series and ClearPath HMP NX Systems I/O
	Hardware Configuration Guide (7008 6087) for information on PCD
	generation.

LPT		M	U
		K
Ser 1	Ser 2			LAN
		Vid	U

Serial 1

Serial 2

To CS Bus in CEC or PCI

Thru card in channel racks

Server A

7019 7488-001 (CSB3-10C)

Remaining Servers 7019 7488-002 (CSB3-15C)

0627A

Figure 6–2. VX1305 Server CS Bus Cable Connection

7017 6300–005 6–9