Unisys NX5820 manual Basic Features, VX1505 Servers, Min Max Std

VX1505 Servers

Table 6–8. Basic Features, VX1505 Servers

VX1505	Processors	Memory 4	10/100	3.5-Inch CD-ROM		DAT	RAID
Servers4	2,3,8		Mbps LAN	1.44-MB	Drive	Tape	9-GB
			Interface	Floppy		Drive7	Hard Disk Drives 5
				Disk Drive

		Min.	Max.	Std.	Std.	Std.	Std.	Std.	Max.
Per Server 1,6,7	1 to 4	0.5-MB	8-GB	2	1	1	0	2	2

Notes:

1.VX1505-BSE includes the basic components listed in Table 6–10. VX1505-BSU contains the same basic components.

2.VX1505-BSE/-BSU orders required the selection of 1 to 4 of the following:

XER2450-512	Pentium II Xeon CPU, 450-Mhz, 512KB cache
XER2450-1MB	Pentium II Xeon CPU, 450-Mhz, 1MB cache
XER2450-2MB	Pentium II Xeon CPU, 450-Mhz, 2MB cache
XEO3500-512	Pentium III Xeon CPU, 500-Mhz, 512KB cache
XEO3500-1MB	Pentium III Xeon CPU, 500-Mhz, 1MB cache
XEO3500-2MB	Pentium III Xeon CPU, 500-Mhz, 2MB cache
XEO3550-512	Pentium III Xeon CPU, 550-Mhz, 512KB cache
XEO3550-1MB	Pentium III Xeon CPU, 550-Mhz, 1MB cache
XEO3550-2MB	Pentium III Xeon CPU, 550-Mhz, 2MB cache
See Table 6-11

3.All processors with a VX15xx server must be the same style.

4.All VX1505-BSE orders require the selection of the following memory styles (Quantity ordered must be in increments of four (32 total) and the same type):

DIM5072-128	128MB Memory, EDO, 50ns DIMMs (32 maximum, including
	initial)=4.0GB
DIM5072-256	256MB Memory, EDO, 50ns DIMMs (32 maximum, including
	initial)=8.0GB

5.Two 9-GB hard disk drives are included with each VX1505-BSE/-BSU package. No additional drive can be added.

6.A connection package (Table 6-13), optional user access components (Table 6-14), optional PCT Thru card and software package must be ordered separately.

7.A tape is recommended for back-up. Order the following styles if desired:

PCT12000-DAT	12 GB DAT Tape Drive (Qty. 1)
EXD221-SXR	Tape Drawer (Qty. 1. Drawer will accommodate 2 tapes)
CBL2210-OSM	10 foot SCSI Interface Cable (Qty. 1. Cable is used between the
	tape and server RAID adapter.)
OSM1000-PRC	IEC320 Rack to Rack Power Cord (Qty. 1)

8.One or more voltage regulators, style XEO24001-VRM, are required dependent upon the number of processors installed. A processor terminator, style XER2400-TRM, is required for each unused processor slot. See Table 6-9.

9.For additional features and enhancement options, reference server specifications

10.For optional hot-swap redundant power supply order component style QR2000101-RPS (Qty. 1)

7017 6300–005 6–11