OP E R AT I O N
Plug & Play Feature
When the TV is initially powered on, two basic customer settings proceed automatically and subsequently: Setting Auto program, Clock.
1
Press the POWER 
button on the remote control.
The message
“Menu language, Channels and Time will be set.”
is displayed. Press the ENTER 
button, then “Select the language of the OSD” menu is automatically displayed.
2
Press the ENTER 
button to enter the language.
Press the UP/DOWN 
buttons to select language, then the ENTER 
button. “Select the antennas to memorize.” menu is automatically displayed.
3
Press the UP/DOWN 
buttons to memorize the channels of the selected connection.
Press the ENTER 
button to select “Start”.
• If the antenna is connected to ANT 1(CABLE), select “CABLE” and if it is connected to ANT 2 (AIR), select “AIR”.
•If both ANT 1 and ANT 2 are connected, select
the “Air + Cable”.
•If the CableCARD is inserted into the
“CableCARD” slot on the rear panel, “Cable” and “Air+Cable” are not available.
