Samsung LN-R377D manual Setting Up Your Remote Control, Setting Up the Remote to Operate Your VCR

OP E R AT I O N

Setting Up Your Remote Control

After it has been set up properly, your remote control can operate in five different modes: TV, VCR, Cable, DVD, or Set-Top Box. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose.

Note

The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes.

Setting Up the Remote to Operate Your VCR

1 Turn off your VCR.

2 Press the MODE button and make sure that the VCR

appears on the LCD screen.

3 Press the SET button on your TV’s remote control.

4 Using the number buttons on your remote control, enter

three digits of the VCR code listed on page 28 of this manual for your brand of VCR. Make sure you enter three digits of the code, even if the first digit is a “0”.

(If more than one code is listed, try the first one.)

5 Press the POWER button on the remote control. Your VCR

should turn on if your remote is set up correctly.

If your VCR does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of VCR. If no other codes are listed, try each VCR code, 000 through 072.

Note on Using Remote Control Modes: VCR

When your remote control is in “VCR” mode, the volume buttons still control your TV’s volume.

English-25