12 Automatic Channel Setup

Although your VCR may automatically set up the channels you receive when you turn it on for the first time, this function lets you set up channels again. Make sure:

The VCR is on and is in VCR position. (The VCR/TV light will appear on the display panel. If it does not, press the VCR/TV button once.)

1

Press the MENU button until MENU 1 appears.

- M E N U 1 -

BTIMER PROGRAMMING

AUTO REPEAT [OFF]

PICTURE SELECT

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

AUTO SATELLITE LINK

2

Press the PLAY button or the STOP button repeatedly to select CHANNEL SET UP. Then, press the F.FWD button.

- M E N U 1 -

TIMER PROGRAMMING

AUTO REPEAT [OFF]

PICTURE SELECT

BCHANNEL SET UP CLOCK SET LANGUAGE SELECT AUTO SATELLITE LINK

3

Press the PLAY button or the STOP button repeatedly to select AUTO SET UP.

12

34

CHANNEL SET UP

BAUTO SET UP MANUAL SET UP

4

Press the F.FWD button. The VCR will memorize all available channels. AUTO SET UP will flash on the screen and channels will count up on the screen as setup progresses. When setup is com- plete, the lowest channel you receive will appear on the screen.

Helpful Hints

Line Input mode will always be stored in the VCR’s memory as channel 001 or 002. When you select channel 001 or 002 with the Number buttons, LineIn Rear (L1) (the AUDIO and VIDEO IN jacks on the back of the VCR) or LineIn Front (L2) (the AUDIO and VIDEO In jacks on the front of the VCR) will appear on the screen.

You may also select LineIn Rear (L1) or LineIn Front (L2) with the CHANNEL o/p buttons.

You can not program channels if you are using a Cable Box/DBS. Details are on pages eight-nine.

Page 12
Image 12
Magnavox SVB106 owner manual Automatic Channel Setup, Press the Menu button until Menu 1 appears