36 Picture Select
This feature enables you to select the picture quality of a tape.
Make sure:
●The VCR is on and is in VCR position. The VCR/TV light will appear. If it does not, press the VCR/TV button once.
●There is a tape in the VCR.
1
During tape playback, press the MENU button until
MENU 1 appears.
- M E N U 1 -
BTIMER PROGRAMMING
AUTO REPEAT | [OFF] |
PICTURE SELECT |
|
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUTO SATELLITE LINK
2
Press the PLAY button or the STOP button repeatedly to choose PICTURE SELECT. Then, press the F.FWD but- 1 ton. The menu will disappear, and a Picture Select setting will
appear at the bottom of the screen.
- M E N U 1 -
TIMER PROGRAMMING
AUTO REPEAT | [OFF] |
BPICTURE SELECT CHANNEL SET UP CLOCK SET LANGUAGE SELECT AUTO SATELLITE LINK
3
Within five seconds, press the F.FWD button until your desired setting (NORMAL, SOFT or SHARP) appears on the screen. The setting will disappear from the screen in about five seconds.
[NORMAL]
3 2
Helpful Hint
•You may only choose PICTURE SELECT during tape playback.
