Magnavox SVB106 owner manual Real-Time Counter Memory, Press the Play button to watch the tape

Real-Time Counter Memory 37

Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later. Make sure:

● The VCR is on and is in VCR position. The VCR/TV light will appear. If it does not, press the VCR/TV button once.

● There is a tape in the VCR.

1
Play, fast forward, or rewind a tape to the location that you would
like to refer to later. Press the STOP button to stop the
tape.
2	2
Press the COUNTER RESET/EXIT button (repeatedly if
necessary) to reset the real-time counter to zero.
0 : 00 : 00		3
3	4
Press the COUNTER MEMORY button so that M appears
on the screen beside the real-time counter.	1
M 0 : 00 : 00

4

To go to a tape location where the real-time counter was reset to zero, press the REWIND button or the F.FWD button when playback is stopped.

When the tape reaches the point at which the real-time counter was reset to zero, the tape will stop.

Press the PLAY button to watch the tape.

Helpful Hints

•You may only set the real-time counter memory at one location at a time. If you set the real-time counter to zero at a second location, the pre- vious real-time counter to zero setting will be erased.

•To erase the real-time counter mem- ory, press the COUNTER MEMORY button repeatedly so that the M dis- appears from the screen.

•The COUNTER MEMORY button does not function if AUTO REPEAT is set to [ON]. Details are on page 34.