Hookups With a Stereo TV | Magnavox SVB106 manual

10 Hookups With a Stereo TV

1 antenna or cable to

ANT(enna)

IN Jack

VIDEO (yellow) and

AUDIO (red and white) 2

OUT Jacks

●Audio and Video cables are not supplied. 3

1

Audio and Video

IN Jacks on TV

Video Cable

Audio Cable

Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR.

2

Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV.

3

Connect an audio cable to the red and white AUDIO OUT Jacks on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jacks on your TV. Match the colors on the cable to the colors of the jacks.

4

Turn on your TV, making sure it is in Line Input mode. Please refer to your TV owner’s manual for details.

Helpful Hints

•A stereo audio cable (not supplied) is used here to deliver audio to the TV’s left and right channels.

•The TV must be in Line Input mode. Please refer to your TV owner’s manual.

•If your TV has only one AUDIO IN jack, connect only the white audio cable to the white AUDIO OUT jack on the VCR and to the white AUDIO IN jack on the TV. Refer to your TV owner’s manual for details of connecting a VCR to the TV.

Image 10

Magnavox SVB106 owner manual Hookups With a Stereo TV

Contents

Video Cassette Recorder Warranty Verification For Customer Use Introduction FeaturesSafety Precautions Declaration of Conformity Table of Contents Using the Remote Control Before Using Your VCRPutting Batteries in the Remote Control VCR maintenance Hookups Without a Cable Box/Direct Broadcast System Disconnect the antenna or cable from your TV Plug in the AC power cords of the TV and the VCR Hookups Without a Cable Box/Direct Broadcast System cont’d Connections Hookups With a Cable Box/Direct Broadcast SystemRecording/Viewing Any Channel Recording One Channel/Watching Another Cable Box/DBS RF coaxial SignalTV’s Antenna Jack Hookups With a Stereo TV Turning on Your VCR Below will appear Automatic Channel Setup Press the Menu button until Menu 1 appears Automatic Channel Setup cont’d Adding/Deleting Channels Setting the Clock Follow the steps below to set your VCR’s clock. Make sure Setting the Clock cont’d Press the Counter RESET/EXIT button to exit Language Selection Press the Display button once OFF mode OFF mode Press the Display button once. Count modePress the Display button once Clock mode On-Screen Status Displays Number Buttons Remote Control ButtonsPower Button Record Button Time Search Button Counter RESET/EXIT ButtonEject Button Index Search Button VCR Display Panel Front Panel Audio OUT Jacks AC Power CordRear Panel Video OUT Jack VHS Quasi Play Back Sqpb PlayingRead and follow the steps below to play a tape Recording Starting an OTR One-Touch RecordingStopping an OTR Timer Recording Channels are set up Clock is set Repeat the procedure in to set the recording’s end time Timer Recording cont’dEnter the recording’s start time Start Time END Time Channel REC Speed SLP Timer Recording cont’d Cancelling a Timer Recording Correcting a Timer Recording Auto Satellite Link Using a Satellite Tuner Recording One Channel/Watching Another Rerecording Tape Duplication Repeat Play Viewing a Still Picture Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Slow Motion Picture Picture Select Appear at the bottom of the screen Real-Time Counter Memory Press the Play button to watch the tape Index Search Press the Index Search button Time Search Press the Time Search button Press the QUICK-FIND button Quick FindTo resume normal tape playback, press the Play button Automatic Playback Features Monitor MTS Broadcast Stereo SystemUnderstanding On-Screen Displays Or Receiver MTS Broadcast Stereo System cont’d Press the Menu button repeatedly until Menu 2 appears Hi-Fi Stereo Sound System Press the Counter RESET/EXIT buttonPlease see additional notes on Glossary Cable Box/DBS Output Channel Channel 3 or Helpful Hints Helpful Hints cont’d Limited Warranty Video Cassette Recorder or Player Payment Amount Limited Warranty cont’dTo obtain a replacement product from Philips Check or money order Account number Specifications Second audio Power17-18 Recording Timer 12, 33 Broadcast Supplied Accessories