CO N N E C T I O N S
4
Connect an RF cable between the ANT OUT terminal on the cable box and the
Incoming
cable
Splitter
| RF (A/B) |
Cable Box | Switch |
|
5
Connect another cable between the other OUT terminal on the splitter and the
Incoming
cable
Splitter
| RF (A/B) |
Cable Box | Switch |
6
Connect the last
RF cable between the OUT terminal on the RF (A/B) switch and the ANT 1 IN(CABLE) terminal on the rear of the TV.
Incoming
cable
Splitter
ANT 1IN (CABLE)
TV Rear
| RF (A/B) |
Cable Box | Switch |
After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels.
(When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
