Samsung LN-R377D manual Connecting to a Cable Box that Descrambles All Channels

CO N N E C T I O N S

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is
connected to the
ANT OUT terminal	ANT IN	ANT OUT
on your cable box.

2	ANT 1 IN
Connect the other end	(CABLE)

of this cable to the ANT 1 IN(CABLE) terminal on the back of the TV.

This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of RF cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.

This terminal might be labeled “ANT IN”, “VHF IN” or simply, “IN”.

ANT IN

2

Connect this cable to a two-way splitter.

Incoming

cable

Splitter

3

Connect an RF cable between an OUTPUT terminal on the splitter and the IN terminal on the cable box.

Incoming

cable

Splitter

Cable Box

English-9