INSTALLING OPTIONAL BACK DRAFT DAMPER
The back draft damper may be installed in either a vertical or horizontal section of the hot air duct. It should be positioned as close to the plenum opening of the furnace as practical. Press female end of the back draft damper over Clayton Furnace collar or male end of the duct pipe. When properly placed the arrows on the air flow decal should point away from the furnace.
| SEE PRODUCT |
| LABEL. |
HORIZONTAL | NOTE: POSITION SO |
INSTALLATION | THAT AIR FLOW WILL |
| OPEN DAMPER |
| FROM BOTTOM. |
NOTE: POSITION SO |
| |
THAT AIR FLOW WILL |
| |
OPEN DAMPER IN | VERTICAL | |
DIRECTION OF | INSTALLATION | |
DUCTWORK. | ||
|
19