INSTALLING TOP SURROUND & BRASS TRIM
INSTALLING TOP SURROUND
NOTE: YOU WILL NEED A FLATHEAD SCREW-
DRIVER AND A 3/8"
SURROUND AND BRASS TRIM.
The top surround is shipped unassembled for shipping purposes only. To install the top surround place the surround on top of the unit and line up the holes. Attach the top surround to the heater using (5) of the machine screws and kep nuts provided in the parts bag and tighten firmly.
INSTALLING BRASS TRIM
Before attaching the brass trim to the surround you must first assemble the (3) brass trim pieces together. Do this you will use the (2) blank corner keys and the (2) corner keys w/screws.
Place one each of the keys together for each side and slide them into the back grooves of the trim as shown below. Tighten the set screws with a flathead screw driver. (Do this for both sides)
Now slide the Brass Trim Assembly over the surround and attach using the (9) remaining screws and kep nuts provided in the parts bag.
BRASS KNOB INSTALLATION
For shipping purposes the brass knob on the lower access door comes mounted inside the door. Simply unscrew the knob using a screwdriver, turn the knob around to the outside and reattach.
12
