Completion of pairing:
Wait until both indicator lights turn solid blue. This can take up to 2 minutes but typically is done within a few seconds.
The uMic can be paired to a maximum of 4 devices. A fifth pairing will replace the first paired device.
Two devices need to be paired only once. They remain paired after switching off and will automatically connect after being turned on again.
Understanding the status light
Information during operation:
|
| audio |
| uMic | uDirect 2 |
Switching ON | Green 2 seconds |
|
Streaming | Solid blue | Solid blue |
Streaming | Short blue blink | Short blue blink |
paused |
|
|
Pairing mode | Rapid blue blink | Rapid blue blink |
10 |
|
|
Information about power and battery:
Switching ON | Green 2 seconds |
|
|
Switching OFF | Red 2 seconds |
|
|
Charging | Solid red |
|
|
Charged and full battery | Solid green |
|
|
Low battery warning | Additional red short |
| blink as well as the |
| main light |
|
|
uMic sleep mode or off | Indicator is unlit |
|
|
Switch the uMic off and on again to turn the device on from sleep mode.
If the red “low battery” blinks: Battery level is <20%
Less than 1.5 hours are left for streaming Consider charging the uMic
The uMic can also be charged during operation.
11
