Functional test of uMic
Before using the system, perform a quick functional test by gently tapping on the microphone opening.
You should clearly hear the tapping noise in your hearing aids.
Line of sight between the uMic and the streamer is usually not required. If the audio transmission ends abruptly, refer to the troubleshooting guide.
Setting the uMic volume
To change the uMic volume:
1. Speak into the uMic from a 20 cm (8”) distance.
2. Use the volume (
) buttons
to set the uMic volume to a comfortable volume level.
If your hearing aids pick up too much ambient noise, use the following 2 steps to give the uMic more focus:
1. Reduce the hearing aid volume by pressing the uDirect 2 (
) button.
2. Then increase the uMic volume by pressing the uMic (
) button.
The uMic volume setting will be stored even when switching off the uMic.
Your hearing healthcare professional can change the level of the hearing aid microphones while using the uMic to adjust the volume of sounds around you.
14 | 15 |
