Universal Electronics C4000, S4000 manual Programming Channel Control Lock, Changing Volume Lock

Generic Pioneer Charter OCAP.fm Page 15 Friday, July 20, 2007 1:28 PM

PROGRAMMING CHANNEL CONTROL LOCK

By default, the remote control’s channel-control capabilities are locked to the cable converter. The affected keys* are 1 through 0, CH+, CH-, and LAST. This guarantees that you do not inadvertently change a channel on your TV or VCR. However, you can de- activate this feature to allow full access to these keys in the TV and VCR modes.

Unlocking Channel Control

1.On the remote control, press CBL (or STB) once; it blinks once. Press and hold SET UP until the CBL (or STB) key blinks twice.

2.Enter 9 7 3. The CBL (or STB) key blinks twice.

3.Press CH- once. The CBL (or STB) key blinks

four times.

Now the remote control provides TV and VCR channel- control capabilities while in the TV or VCR mode.

Locking Channel Control to CBL

1.On the remote control, press CBL (or STB) once; it blinks once. Press and hold SET UP until the CBL (or STB) key blinks twice.

2.Enter 9 7 3.The CBL (or STB) key blinks twice.

3.Press CH+ once. The CBL (or STB) key blinks twice.

Now, regardless of what mode you select, the channel keys only change channels on your cable converter.

CHANGING VOLUME LOCK

Volume Lock allows you to control the volume through the device identified as having your primary speaker(s), regardless of which mode you are using. On the C4000 and S4000 Remote Controls, Global Volume Lock is set to TV, so you can control TV volume while in the AUX,

www.urcsupport.com

15