Generic Pioneer Charter OCAP.fm Page 20 Friday, July 20, 2007 1:28 PM
USING KEYMOVER
The C4000 and S4000 Remote Controls include a Keymover feature that allows you to map (or copy) keys from one mode (i.e., source mode) to another mode (i.e., destination mode).
Programming Keymover
For example, if your DVD player does not have volume control, you can map those keys (i.e., VOL+,
1.On the remote control, press CBL (or STB) once; it blinks once. Then press and hold SET UP until the CBL (or STB) key blinks twice.
2.Enter 9 9 4. The CBL (or STB) key blinks 
twice.
3.For the source mode, press a desired device key once (i.e., AUX, TV, DVD, CBL or STB). For this example, press TV once.
4.For the source key, press a key to be moved once. For this example press VOL- once.
5.For the destination mode, press a desired
device key once (i.e., AUX, TV, DVD, or CBL or STB). For this example, press DVD once.
6.For the destination key, press a key to be
moved once. For this example press VOL+ once.
7.Repeat steps 1 to 6 to move additional keys. For this example, repeat steps 1 to 6 two more
times to map the remaining volume control keys, substituting VOL- and MUTE as source and destination keys in steps 4 and 6.
Upon completion of the above procedure, you can now use your C4000 and S4000 Remote Controls to control the TV’s volume and mute in the DVD mode, as well as in the TV mode.
www.urcsupport.com
20
