Universal Remote Control MRF-300/RFX150 Test RF Address, Adjust IR Line Output Levels

MRF-300 BASE STATION

Step 7 - Test RF Address

Test that pressing a button on the remote control lights the STATUS LED of the MRF-300.The STATUS LED only lights when the correct RF address is received.

Step 8 - Adjust IR Line

Output Levels

Adjust each of the IR Line Output levels for best operation.

NOTE: TiVo, Replay TV, Satellite Receivers and Cable Boxes are all extremely sensitive to IR overload or saturation. Put up the on screen guide and test the navigation arrows. If operation is inconsistent or sluggish, LOWER the IR line output.

If you still have sluggish operation, check that the remote control is set to a particular LINE OUT, rather than ALL.When IR commands are sent to all the flashers in a cabinet, you can have difficulty adjusting the IR Output.

Reprogram the remote control to send IR commands only via a specific (1-6) Line Output, then readjust the IR Line Output level.

Page 6