Hitachi HV-D25 Set button, Remote status LED Remote switch, BLK control, Iris control, ∙ Manual

16￿￿

11￿￿ Set button

When pressed, control data are stored and the LED lights for about 1 second.

•Notes:

1￿ Be sure to press the Set button in order to save the setting data before switching off power. Otherwise the data are lost and old data are returned at power on. Also, the old data are deleted

by pressing the Set button.

2￿ The Set button operation differs between the RC-C10and RC-C10(R1). The RC-C10stores the panel adjustment and operation data. In addition, the RC-C10 (R1) stores the menu mode data, while these are also stored by the HV-D15 camera.

12￿￿		Remote status LED
13￿	￿	Remote switch
∙ On (LED			12			red)		:The RC-C10can be operated for normal camera control.
∙ Lock (LED					12		green)	:RC-C10functions are inhibited, but control data are sent to the camera.
∙ Off (LED				12		green)		:Control data are not sent from RC-C10and control is from the camera operation itself.

14

￿￿ M. BLK control

Master black control

15

￿￿ Iris control

￿￿ Adjusts the lens iris. ￿￿ LENS TYPE:DC

∙ Auto	:Over-rideadjustable (about 2 f-stops)
∙ Remote	:Adjustable from fully closed to fully open
∙ Manual	:Iris cannot be adjusted from the RC-C10.

∙AGC and AES operation over-ridecan be adjusted.

￿￿LENS TYPE:VIDEO

∙	Auto	:Over-rideadjustable (about 2 f-stops)
∙	Remote	:Iris cannot be adjusted from the RC-C10.

∙Manual:Over-rideadjustable (about 2 f-stops)

LED indicators

Light according to selected mode.

17￿￿ DTL button

￿ets the camera detail amount. Settings are Off, Low, Normal and High. Ordinarily set to Normal.

18Iris button

Selects the lens iris mode. Selectable modes are Auto, Remote and Manual.

Refer to the RC-C10 Operation Manual for adjustment and operation.

42