Hitachi HV-D25 operation manual Function Selection by Internal Switch Setting, Connectors

Function Selection by Internal Switch Setting

SW405

For connection with the remote control box RC-C10, set SW405 to the RC-C10 position.

For connection with the personal computer, set SW405 to the RS-232C position.

At shipment from factory, SW405 is set at the RC-C10 position.

Connectors

MULTI connector (SDEB-9S)

Pin No.	Signal designation
1	￿ GND
2	￿ WE
3	￿ R/R-Y/C output
4	￿ G/Y output
5	￿ B/B-Y output
6	￿ VBS output
7	￿ SYNC output
8	￿ HD output
9	￿ VD output

REMOTE connector (HR10A-7R-4S)

Pin No. Signal designation

1￿ +12V output

2￿ RXD/SD input

3￿ TXD/SD output

4￿ GND

Use M2.6 plug retaining screws.

47