Universal Remote Control SL-8000 manual Auto Search Method

Using Your Remote

Auto Search Method

Please use this method if none of the Set-Up Code numbers worked for your device during the standard set-up proce- dure or if the manufacturer or brand for your device is not listed in Set-Up Code Tables.

1 Turn on the device you would like the remote control to operate, either manually or with your original remote control.

2 Press the corresponding Device Button (TV, VCR, SAT, CBL, AUD, CD, DVD, or AUX) and the MUTE button, simultaneously. SET will appear in the LCD.

	AUD	CD	DVD	AUX	Device Buttons
	SAT	TV	VCR	CBL
	POWER				Channel Buttons
			VOL	CH
Mute Button
	MUTE	T/ V

Note: SET appears in the LCD for 20 seconds to indicate that the remote control is ready to be programmed. The following steps must be entered while SET appears in the LCD.

3 Point the remote control toward the device and press the CHANNEL UP button on the remote control. Each but- ton press sends the signal for one Set-Up Code number. Keeping the CHANNEL UP button pressed produces a quick scanning of the Set-Up Code numbers.

Release the CHANNEL UP button as soon as the device turns off. Please confirm that you have the correct code by pressing the MUTE button on the remote. You should be able to turn your device on and off with this button.

10