Universal Remote Control SL-8000 manual Using Your Remote, Backlighting

Using Your Remote

No IR commands are emitted during the second press of a Device button when the remote is in the Automatic Audio mode. Pressing the Device button again will return the remote to the Main Device Mode.

To Delete the Automatic Audio for a Device mode:

1 Press and hold the AUDIO Device button and the LIGHT button simultaneously. A_SET will appear in the LCD.

2 Press the Device button corresponding to the Device mode to be deleted for Automatic Audio. E.g. VCR, CD etc. A_OFF will appear in the LCD indicating the deleted status of the automatic Audio mode for the Device mode.

3 Press the ENTER button to store the programming. SAVE will flash in the LCD and then return to AUDIO.

To Return to Automatic Audio for a Device mode:

1 Press and hold the AUDIO Device button and the LIGHT button simultaneously. A_SET will appear in the LCD.

2 Press the Device button corresponding to the Device mode to be added for Automatic Audio. E.g. VCR, CD etc. A_ON will appear in the LCD indicating the active status of the Automatic Audio mode for the Device mode.

3 Press ENTER to store the programming. SAVE will flash in the LCD and then return to AUDIO.

Backlighting

All the buttons and the LCD on the SL-8000are back-lit for 7 seconds when the LIGHT button is pressed. The back- light is extended an additional 7 seconds with any button press while the backlight is on.

16