•dld.so
•libsin.so
You cannot override the settings for uld.so, dld.so, and libsin.so.
How to Specify Load Module Names
HP Caliper matches load module names in the following way:
•If you provide a full path for the module name, only an exact match succeeds.
•To imply all modules within a directory and its subdirectories, you provide a directory name with a trailing slash (/).
•If you do not specify the full path, only the base file name is used to match module names. For example, if you specify the full path like this:
You get these results: |
|
/usr/lib/hpux64/libc.so | match |
/usr/lib/hpux64/libc.so.1 | no match |
/usr/lib/hpux32/libc.so | no match |
If you provide the base file name without the full path, HP Caliper considers it a match if the base file name is the suffix of the loaded module or if the base file name is present in the load module's full path and followed by a period (.).
For example:
gives these results: |
|
/usr/lib/hpux64/libc.so | match |
/usr/lib/hpux64/libc.so.1 | match |
Here is another example: |
|
| |
gives these results: |
|
/usr/lib/hpux64/ | no match |
libcurses.so |
|
To match, you would have to specify libcurses.
You can repeat each of these options multiple times. HP Caliper uses the last value of
If you specify
If you specify
For example, if you only want to include libc in a measurement, you would use these options:
96 Configuring HP Caliper