NOTE: With this HP Caliper option, you must use a qualifier or an equals sign (=). You cannot use
If you specify
For details, see “Measuring System Usage Concurrently with Other Measurements ” (page 158).
The
Enables
Default value is all.,
all Collect and report data per thread.
For a multithreaded program, the Function Summary and the Function Details sections of reports show information across threads in addition to the
This option is supported for these measurements:
•alat
•branch
•cstack
•dcache
•dtlb
•fprof
•icache
•itlb
Specifies which traps HP Caliper should report information about when the traps measurement is run.
You can specify the names of 1 to 6
Available on Integrity servers
If you do not use this option when you run the traps measurement, by default the top 6 traps are reported.
When the traps measurement is run , information about all 34 traps is collected. The
By default, the traps report is sorted on the number of samples in the first trap in the trap list (the Samples per Trap column in the report). To sort on the total number of trap samples (the Trap Samples column), use the