If you set the
•A list of samples, with each sample showing both sampled values and statistics derived from those values. To report samples (not shown by default), specify
Example Command Lines for Text Report
$ caliper cpu
This command runs program, measuring and reporting the overview metrics by taking one sample every 8 milliseconds. By default, 125
$ caliper cpu
This command runs the program wordplay , measuring and reporting the overview metrics by taking a sample every 100 milliseconds and aggregating 10
$ caliper cpu
This command gets separate CPI data at user and kernel privilege levels.
$ caliper cpu
This command collects
Example Command Line for CSV Report
$ caliper cpu
CPU Event Sets
For the cpu measurement report, you specify one or more
The available event sets are:
brpath | Provides information on the dynamic mix of branch types, branch path |
| distribution, branches per instruction, and so forth. |
brpred | Provides metrics that are useful in assessing the effectiveness of branch |
| prediction. |
c2c | Provides |
cpi | Provides metrics related to cycles per instruction (CPI). |
cpubus | Provides information on the demand that a specific CPU presents to the central |
| electronics complex (CEC), the chip set surrounding the CPU, and the demand |
| the CPU experiences due to the CEC traffic initiated by other CPUs or I/O |
| components in the system. |
cspec | Provides metrics on the effectiveness of control speculation. |
dispersal | Provides a qualitative view of the parallelism that is available as seen at |
| |
dspec | Provides metrics on the effectiveness of data speculation. |
fp | Provides information relating to |
| rate, and flush/trap events density. |
l1dcache | Provides miss rate information for the L1 data cache. |
l1icache | Provides miss and prefetch usage information for the L1 instruction cache. |
l2cache | Provides miss rate information for the L2 unified cache. |
184 Descriptions of Measurement Reports