NOTE: With this HP Caliper option, you must use a qualifier or an equals sign (=). You cannot use
If you specify
Use of this option causes two different sets of memory measurements to be taken, each reported in its own table in the report:
•Overall memory available (and currently in use and free) on the system
•Memory currently being consumed by the process(es) being measured by a particular HP Caliper run
For details, see “Measuring Memory Usage Concurrently with Other Measurements ” (p. 154).
See
Specifies the default setting for load module inclusion in the measurement.
If
If
See “Specifying Which Load Modules to Collect Data For” (p. 95).
Specifies explicitly the load modules to be excluded from measurement.
You can specify module names in several ways:
•As a simple file name (libapplib1.so) that matches libraries of this name in any directory
•As a
•As a
For measurements that get their data from the PMU (that is, most of the HP Caliper measurements), this option will show no data in the Function Summary/Details sections for the selected modules. However, this does not mean that samples did not occur in these modules.
See “Specifying Which Load Modules to Collect Data For” (p. 95).
Specifies explicitly the load modules to be included in the measurement.
You can specify module names in several ways:
•As a simple filename (libapplib1.so) that matches libraries of this name in any directory
•As a
•As a
66 HP Caliper Options