NETGEAR WNDR3400 Feature Default Setting Internet connection, Local network, Wireless, Firewall

N600 Wireless Dual Band Router WNDR3400 User Manual

Table A-1. WNDR3400 Router Default Configuration Settings (continued)

Feature		Default Setting
Internet connection
	MAC Address	Use default hardware address
	MTU Size	1500
Local network
	Router LAN IP address printed on	192.168.1.1
	product label (gateway IP address)
	Router subnet	255.255.255.0
	DHCP server	Enabled
	DHCP range	192.168.1.2 to 192.168.1.254
	Time zone	Pacific time
	Time zone Daylight Saving time	Disabled
	Allow a registrar to configure this router	Enabled
Wireless
	Wireless communication	Enabled
	SSID names	• 2.4GHz b/g/n: NETGEAR
		• 5GHz a/n: NETGEAR-5G
	Security	Disabled
	Broadcast SSID	Enabled
	Transmission speed	Autoa
	Country/region	United States in the US; otherwise varies by region
	RF channel	6 until region selected
	Operating mode	Up to 300 Mbps for 5GHz and
		up to 145 Mbps for 2.4GHzb
	Data rate	Best
	Output power	Full
Firewall
	Inbound (communications coming in	Disabled (bars all unsolicited requests)
	from the Internet)
	Outbound (communications going out	Enabled (all)
	to the Internet)

a. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.

b. Configurable to 300 Mbps at 2.4GHz.

Default Configuration and Technical Specifications A-2

v1.0, August 2010