NETGEAR WNDR3400 user manual Attached devices

		N600 Wireless Dual Band Router WNDR3400 User Manual
Table 4-1. Wireless Router Status Fields (continued)
Field		Description
LAN Port	MAC Address	The Media Access Control address. This is the unique physical address
		being used by the Ethernet (LAN) port of the router.
	IP Address	The IP address being used by the Ethernet (LAN) port of the router. The
		default is 192.168.1.1.
	DHCP	Identifies whether the router’s built-in DHCP server is active for the LAN-
		attached devices.
	IP Subnet Mask	The IP subnet mask being used by the Ethernet (LAN) port of the router.
		The default is 255.255.255.0.
Wireless		Name (SSID): The 11N wireless network name (SSID) being used by the
Port	5GHz a/n	wireless port of the router. The default is NETGEAR-5G.
		Region: The geographic region where the router is being used. It might be
		illegal to use the wireless features of the router in some parts of the world.
		Channel: Identifies the operating channel of the wireless port being used.
		The default channel is 36. If there is an Auto option in the channel list and
		you select it, the router will find the best operating channel available. If you
		notice interference from nearby devices, you can select a different channel.
		Mode: Indicates the wireless communication mode:
		• Up to 54Mbps
		• Up to 145Mbps
		• Up to 300Mbps (default)
		Wireless AP: Indicates whether the radio feature of the router is enabled. If
		this feature is not enabled, the Wireless light on the front panel is off.
		Broadcast Name: Indicates whether the router is broadcasting its SSID.

Using Network Monitoring Tools 4-7

v1.0, August 2010