NETGEAR WNDR3400 user manual Scheduling Wireless Signal Down Time

N600 Wireless Dual Band Router WNDR3400 User Manual

•To allow access from a single IP address on the Internet, select Only This Computer. Enter the IP address that will be allowed access.

3.Specify the port number for accessing the management interface.

Normal Web browser access uses the standard HTTP service port 80. For greater security, enter a custom port number for the remote management Web interface. Choose a number between 1024 and 65535, but do not use the number of any common service port. The default is 8080, which is a common alternate for HTTP.

4.Click Apply to have your changes take effect.

Note: When accessing your router from the Internet, type your router’s WAN IP address into your browser’s address or location field, followed by a colon (:) and the

custom port number. For example, if your external address is 134.177.0.123 and you use port number 8080, then enter http://134.177.0.123:8080 in your browser.

Scheduling Wireless Signal Down Time

For each wireless radio, you can schedule times when you want the wireless signal to be off. During a scheduled "off" period, the specific wireless LED and the Dome LED (if applicable) will be turned off as well. From the main menu, under Advanced, select Wireless Settings.

Figure 4-10

Using Network Monitoring Tools 4-14

v1.0, August 2010