NETGEAR WNDR3400 user manual Lan Tcp/Ip

	N600 Wireless Dual Band Router WNDR3400 User Manual
Table 5-1. LAN Setup
Settings		Description
LAN TCP/IP	IP Address	The LAN IP address of the wireless router.
Setup
	IP Subnet Mask	The LAN subnet mask of the wireless router. Combined
		with the IP address, the IP Subnet Mask allows a device to
		know which other addresses are local to it, and which must
		be reached through a gateway or wireless router.
	RIP Direction	RIP (Router Information Protocol) allows a wireless router
		to exchange routing information with other routers. This
		setting controls how the wireless router sends and receives
		RIP packets. Both is the default.
		• Both or Out Only. The wireless router broadcasts its
		routing table periodically.
		• Both or In Only. The wireless router incorporates the RIP
		information that it receives.
	RIP Version	This controls the format and the broadcasting method of the
		RIP packets that the wireless router sends. It recognizes
		both formats when receiving. By default, the RIP function is
		disabled.
		• RIP-1 is universally supported. It is adequate for most
		networks, unless you have an unusual network setup.
		• RIP-2 carries more information. Both RIP-2B and RIP-2M
		send the routing data in RIP-2 format. RIP-2B uses
		subnet broadcasting. RIP-2M uses multicasting.
DHCP Server	Use Router as a DHCP	This check box is usually selected so that the wireless
For more	Server	router functions as a Dynamic Host Configuration Protocol
information		(DHCP) server. See “Using the Router as a DHCP Server”
		on page 5-4.
	Starting IP Address	Specify the start of the range for the pool of IP addresses in
		the same subnet as the wireless router.
	Ending IP Address	Specify the end of the range for the pool of IP addresses in
		the same subnet as the wireless router.
Address Reservation		When you specify a reserved IP address for a computer on
For more information, see “Address		the LAN, that computer receives the same IP address each
Reservation” on page 5-4.		time it access the router’s DHCP server. Assign reserved IP
		addresses to servers that require permanent IP settings.

Customizing Your Network Settings 5-3

v1.0, August 2010