N600 Wireless Dual Band Router WNDR3400 User Manual

SSID. The default SSID for the wireless router is NETGEAR.

The wireless radio frequency (2.4GHz or 5GHz) that each wireless adapter supports.

Wireless security option. To successfully implement wireless security, check each wireless adapter to determine which wireless security option it supports.

See “Manually Configuring Your Wireless Settings” on page 2-4.

Push 'N' Connect (WPS) automatically implements wireless security on the wireless router while, at the same time, allowing you to automatically implement wireless security on any WPS-enabled devices (such as wireless computers and wireless adapter cards). You activate WPS by pressing a WPS button on the wireless router, clicking an onscreen WPS button, or entering a PIN number. This generates a new SSID and implements WPA/WPA2 security.

Note: NETGEAR’s Push 'N' Connect feature is based on the Wi-Fi Protected Setup (WPS) standard (for more information, see http://www.wi-fi.org). All other Wi- Fi-certified and WPS-capable products should be compatible with NETGEAR products that implement Push 'N' Connect.

To set up your wireless network using the WPS feature:

Use dome on top of the wireless router (there is also an onscreen WPS button), or enter the PIN of the wireless device.

Make sure that all wireless computers and wireless adapters on the network are Wi-Fi certified and WPA or WPA 2 capable, and that they support WPS configuration.

See “Using Push 'N' Connect (WPS) to Configure Your Wireless Network” on page 2-11.

Wireless Placement and Range Guidelines

The range of your wireless connection can vary significantly based on the physical placement of the wireless router. The latency, data throughput performance, and notebook power consumption of wireless adapters also vary depending on your configuration choices.

For best results, place your wireless router according to the following guidelines:

Near the center of the area in which your PCs will operate.

In an elevated location such as a high shelf where the wirelessly connected PCs have line-of- sight access (even if through walls).

Away from sources of interference, such as PCs, microwave ovens, and 2.4 GHz cordless phones.

Away from large metal surfaces.

Safeguarding Your Network

2-2

v1.0, August 2010

Page 24
Image 24
NETGEAR WNDR3400 user manual Wireless Placement and Range Guidelines, See Manually Configuring Your Wireless Settings on