Casio IT-2000W manual Internal Error

Note:

Besides the detail codes which are defined in File Error (INT24h) above, other error codes may be returned as fatal error code of DOS.

Protocol Error (File)

0x04	0x00	CANNOT OVERWRITE	File is “read-only”.
IrDA Protocol Error (For detail refer to the table on the next page.)
0x80	0x01	IrDA PROTOCOL ERROR	Open error.
0x80	0x02		Data send error.
0x80	0x03		Data receive error.
0x80	0x04		Close error.
0x80	0x05		Error in setting of self-station ability.
0x80	0x06		Error in setting of communication status.
Internal Error
0x0F	0x01	INTERNAL ERROR	Parameter error.
0x0F	0x02		Command buffer overflow.
0x0F	0x03		Analysis on received data.
-	-	RECEIVED ERROR REQUEST	When error notification is received from
			the communication partner.

The following error codes are output when an error occurs in the IrDA library.

IrDA Library Error

Termination Code	Message	Description
0X000000001		Resources are not enough.
0X000000002		No device to connect.
0X000000004		No service available at the destination device.
0X000000008		Connecting is failed. Timeout to abort or to wait for the
		connection.
0X000000010		Opened file is accessed to open.
0X000000020		IR_OPEN is not executed.
0X000000040		Specifying WIRE is illegal.
0X000000080		Parameter error.
0X000000100		Tmeout to wait for send/receive.
0X000000200		Over-run error.
0X000000400		Parity error.
0X000000800		Flaming error.
0X000001000		CS signal timeout.
0X000002000		DR signal timeout.
0X000004000		CI signal timeout.
0X000008000		CD signal timeout.

276