Casio IT-2000W manual IrCOMM Layer including TinyTP Layer, Dtr Dsr Dcd Rts Cts

IrCOMM Layer (including TinyTP Layer)

The IrCOMM (Infrared COMM) layer includes TinyTP (Tiny Transport Protocol) layer. IrDA

protocol can be used through this IrCOMM (TinyTP) layer. Three connection methods are

supported: 3-Wire Raw, 3-Wire, and 9-Wire. The credit size of TinyTP is fixed to five (and it cannot

be modified).

3-Wire Raw	Can only perform transmission/reception of user data.
3-Wire	Includes RS-232C setup, communication error, and break signal handling functions
	in addition to being able to perform transmission/reception of user data.
9-Wire	Includes both the 3-Wire functions and signal line control functions. Signal lines
	will be emulated as follows:
	IrDA connection partner		IrDA driver in IT-2000
	DTR			DTR
				DSR
				DCD
				RI
	RTS			RTS
		Fig. 7.8		CTS

IAS will respond with the following data:

Parameters	0x00, 0x01, Wire type	// This wire type can be set by WIN.INI.
	0x01, 0x01, 0x01	// Port type
IrDA:IrLMP:LsapSel	0x02
IrDA:TinyTP:LsapSel	0x03

108